Light Bulb Bases Chart: E26, E12, E14, G9, GU10 and More

What E26, E12, E14, G9 and GU10 mean, how to read a bulb code, which bulb fits each La Caza lamp, and whether LED lights get hot.

Pagoda Floor Lamp switched on
  by Michael Adam

Last updated: November 2026

TL;DR: The base is the part of a bulb that goes into the lamp, and its code tells you what fits. In the US, E26 is the standard screw base on most lamps; E12 is the small candelabra screw; E14 is the small European screw; G9 is a small push-in bulb with two looped pins; GU10 is a twist-and-lock spotlight base. The letters and numbers on the glass (A19, G25, G95) describe the bulb's shape, not its base. To replace a bulb, match the base, the voltage (120V in the US) and the lamp's maximum wattage.

How to read a bulb code

A bulb usually carries two codes:

  • The base code, like E26 or G9. The letter is the type of base (E for an Edison screw, G or GU for pins), and the number is a size in millimeters: the screw's width for E bases, or the distance between the pins for G bases.
  • The shape code, like A19 or G25. The letter is the shape (A for the classic bulb, G for a globe, BR or PAR for reflector spotlights), and the number is its width. In US codes such as A19 or G25 the number is in eighths of an inch; in metric codes such as G95 it is in millimeters.

So "G95 E26" means a 95 mm globe bulb on a standard US screw base.

Light bulb bases chart

Base What it looks like Where you'll find it
E26 (medium) Screw base, 26 mm wide The standard US lamp and ceiling bulb
E27 Screw base, 27 mm wide The European standard; close in size to E26
E17 (intermediate) Screw base, 17 mm wide Some desk lamps and appliance lights
E14 Small screw base, 14 mm wide Many European-designed table and wall lamps
E12 (candelabra) Small screw base, 12 mm wide Chandeliers, sconces and night lights
G9 Two looped pins, 9 mm apart; pushes straight in Small glass shades, multi-globe lamps and fixtures
GU10 Two short pins with feet; push in and twist Spotlights and track lights
GU24 Two pins; push in and twist Energy-saving US fixtures
G4 and GU5.3 (MR16) Two thin pins Low-voltage under-cabinet and spot lights
Integrated LED No bulb to change Many modern and cordless lamps

Which bulb fits your La Caza lamp

Base Lamps
E26 Pluto, Pagoda, Aperol and Saturn (each comes with the La Caza Smart Bulb), and Mirroir
G9 Pearl (nine 5W LED bulbs), Triglobe (three 5W LED bulbs), Prickly (two) and Wick
E14 Projekt
Built-in LED (no bulb) Polynescence, Vector, Glownut, Glownest, and the cordless Kana, Sol, Pebble, Nova and Vinaura

The lamps with the La Caza Smart Bulb can change color and warmth from the La Caza Cali App or Siri. Here is how its daily rhythm works.

How to choose a replacement bulb

  1. Match the base. Check the old bulb or the lamp's specifications.
  2. Match the voltage. In the US, choose a bulb rated for 120V.
  3. Stay at or under the lamp's maximum wattage. An LED uses far fewer watts for the same light, so it is the safe choice.
  4. Check the shape fits. A globe or a long bulb may not fit inside a small shade.
  5. Pick the light color. Warm white (around 2700K to 3000K) suits living rooms and bedrooms; a cooler white suits desks and kitchens.
  6. Dimmable lamp? Use a dimmable bulb. A non-dimmable LED can flicker or buzz on a dimmer.

Do LED lights get hot?

LEDs get warm, but far less hot than incandescent or halogen bulbs giving the same light. Most of an old bulb's energy turns into heat; an LED turns much more of it into light. The warmth you feel on an LED bulb usually comes from its base, where the electronics are. That matters most for small bulbs like G9: a halogen G9 runs very hot, while a G9 LED stays much cooler, which is easier on glass shades and nearby surfaces. Lamps with a built-in LED are designed around that low heat.

Two practical tips: let any bulb cool for a few minutes before you touch it, and never use a bulb with a higher wattage than the lamp allows.

FAQ

Are E26 and E27 bulbs the same?

They are very close in size, and many bulbs are sold as E26/E27. In the US, make sure the bulb is rated for 120V.

What does A19 mean?

It is the shape and size of the glass: the classic bulb shape (A), 19 eighths of an inch wide. It says nothing about the base, which is usually E26.

Is G9 a base or a shape?

On its own, G9 is a base: two looped pins 9 mm apart. Don't confuse it with globe shape codes like G25 or G95.

Can I put a smart bulb in any lamp?

Only if the socket matches and the lamp's switch stays on, because a smart bulb needs power to listen for the app. Lamps with a built-in LED can't take a bulb at all.

My lamp has no bulb. How do I replace it?

Lamps with a built-in LED don't need bulb changes. If one stops working, contact us rather than opening it.

Bottom line

Read the base code first, then the voltage and the wattage. If the lamp has a built-in LED, there's nothing to replace.

About the Author

Michael Adam

Co-founder of La Caza Cali. An engineer at heart with a lifelong obsession for understanding how quality objects are made, Michael leads product development, smart home integration, and the technical vision behind the brand. He built the La Caza Cali App, and every Matter lamp in the collection already works with Siri and Apple Home, bringing the same precision to technology that La Caza Cali brings to design. Read our story →

  by Michael Adam